FPV Racing 5.8GHz VTX Channel Tool

	BetaFPV Z01	Eachine VR006	RunCam TX200	CH 1	CH 2	CH 3	CH 4	CH 5	CH 6	CH 7	CH 8
A	C³	A¹	A¹	5865	5845	5825	5805	5785	5765	5745	5725
B	E⁵	B²	B²	5733	5752	5771	5790	5809	5828	5847	5866
E	B²	C³	E³	5705	5685	5665	5645	5885	5905	5925	5945
F	A¹	D⁴	Airwave⁴	5740	5760	5780	5800	5820	5840	5860	5880
C/R	D⁴	E⁵	Race⁵	5658	5695	5732	5769	5806	5843	5880	5917
DT	F⁶		Low Race⁶	5362	5399	5436	5473	5510	5547	5584	5621
L				5333	5373	5413	5453	5493	5533	5573	5613
H				5653	5693	5733	5773	5813	5853	5893	5933

The Tool

It can be frustrating trying to convert radio channel references like "F2" to radio frequencies. F2 is equal to 5760MHz in this instance. Setting up your FPV gear to be on the correct frequency is crucial.

The manufacturers of the various 5.8GHz FPV transmitters and receivers do not all use the same band reference system, nor do they put them in the same order on the FPV devices. This handy FPV VTX channel tool designed to allow you to set the frequency on your video transmitter and FPV goggles to the desired frequency, without needing to do any conversions. And more importantly, without having to think to deeply about it.

If you are racing FPV, you will be called upon to be on a certain channel or frequency during your race heat. Use this handy FPV channel converter to set your FPV video transmitter and FPV goggles to the frequency you need to race on.

Instructions

Click the buttons above the table to load your FPV video transmitter or goggle devices
Click active buttons to remove an item from the table
Hover over the desired frequency cell
Set your FPV gear up based on the band that is displayed in the column below the desired device
Bookmark the URL - Once you add your devices, you can save the url for quick access
Use the Reset and View All buttons to clear or fill the table
Click on the name of your FPV devices to view documentation and channel charts

References

Thank you Oscar: Frequency Bands
TinyWhoop: Event Race Management Resource

Contact Me and send me a link to your VTX or goggle documentation, and I will add your setup to this chart.